Aftercare & Services
If you would like advice on how to apply for finance or any further information, please get in touch.
|CRF300L + £0.00 Deposit Contribution £0.00 Ride Incentive||6.8%||£83.31||Explore|
Now 286cc, the CRF300L’s new engine produces 10% more peak power of 20.1kW @ 8,500rpm, and 18% more peak torque at 26.6Nm @ 6,500rpm. Inlet cam timing has been revised, alongside both air intake and exhaust system for much stronger mid-range torque and power. Gear ratios 1-5 are shorter, for improved response, while 6th is taller for more relaxed high-speed cruising. An assist/slipper clutch now manages the rear wheel under hard down changes and offers 20% less load at the lever.
A redesigned steel frame, aluminium swingarm and bottom yoke are major contributors to a 4kg overall weight loss and feature revised rigidity balance for feedback and feel. Steering geometry has been adjusted in detail to match, alongside longer travel front/rear suspension and increased ground clearance.
Sharp-edged bodywork features a slimmer tank and seat, and a new positive LCD instrument display. The riding position, too, has been altered to encourage the light steering manoeuvrability needed off-road and, just as usefully, around town.
An extra 14% cubic capacity for the single-cylinder, liquid-cooled DOHC engine – from 250cc to 286cc – is acquired by a 63mm stroke, as opposed to 55mm. Bore remains 76mm, as does compression ratio of 10.7:1. Peak power of 20.1kW arrives @ 8,500rpm, peak torque of 26.6Nm @ 6,500rpm (up from 18.2kW @ 8.500rpm/22.6Nm @ 6,750rpm). The full dyno graph curves tells the full story beyond the peak power and torque uplift: the new engine is considerably stronger, everywhere, from 2,000rpm up.
To match the engine’s heavier punch and to smarten pick-up and acceleration, gear ratios 1-5 are shorter, while 6th gear is taller for more relaxed highway cruising. Addition of an assist/slipper clutch reduces lever load by 20% and manages rear wheel ‘hop’ on rapid downshifts – great for control, on or off-road. On the highway, top speed goes from 129km/h to 132km/h.
Revised timing of the intake cam specifically boosts low- to mid-range response – the rpm range most used around town or off-road – and works with redesigned air filter, exhaust downpipe (660g lighter than the previous design), muffler and ignition timing. An iridium spark plug, along with precise metering of fuel from the PGM-FI injection system, further enhances combustion efficiency and improves environmental credentials.
The engine uses an offset cylinder, reducing internal frictional losses, while the piston itself incorporates a special surface material, plus molybdenum coating. The oil pump features an internal relief structure that prevents aeration of relieved oil. The crank journal employs a half-split, press-fit metal bearing while the crank bearing uses a cast-iron bush. A primary balance shaft further reduces vibration.
The cooling system uses a 12.7kW heat-release radiator, sited on the left of the bike, protected with a polypropylene grill baffled to improve airflow. A thin guide-ring cooling fan is used to maintain even temperatures at low speeds, either in congested traffic or tricky off-road situations.
The CRF300L engine is fully EURO5 compliant.
A total of 4kg has been saved overall from the CRF300L’s chassis, with wet weight of 142kg. The steel semi-double cradle frame is completely new and contributes 2.15kg to the weight loss. Just as importantly, to promote handling feel and connection to front/rear traction, its flexibility balance has been tuned with 25% less lateral rigidity.
This has been achieved with decreased width (-30mm) for the main down tube and smaller, 25.4mm diameter lower down tubes (from 28.6mm) plus a 20mm decrease in width across the central bracing tube.
To match, the one-piece cast aluminium swingarm is not only 550g lighter, it features a 23% reduction in lateral rigidity. It’s also 15mm narrower just behind the pivot point and smooth, cross-sectional shaping is used to create uniform deflection. Extruded aluminium is used for the chain adjustment collar. The steel bottom yoke of the previous design has been changed for aluminium; this shaves 730g from an area high relative to the centre of gravity for faster steering response.
The 43mm Showa inverted fork gains 10mm of stroke to 260mm, with spring weight and damping settings revised for precise control over a wide range of terrain and speeds. Pro-Link rear suspension now features a 260mm axle stroke, from 240mm; the Showa shock absorber is a single tube design.
Ground clearance has been increased, from 255 to 285mm and the frame and engine sit 20mm higher, thanks to revisions to the lower frame, engine crankcases and oil drain plug. Rake and trail are now set at 27.5°/109mm (from 27.6°/113mm) with 10mm longer wheelbase of 1455mm. Turning radius is 2.3m.
The front brake uses a single 256mm disc gripped by a two-piston caliper, the rear a 220mm disc and single-piston caliper; in common with the CRF competition machines the rear master cylinder is now a lightweight, integrated design. The discs feature a wave design – also taken directly from the CRF250R/CRF450R – with exceptional self-cleaning abilities in adverse conditions. 2-channel ABS is standard.
Lightweight aluminium rims further reduce unsprung mass; for 2021 the Alumite surface has been polished to a gloss finish. Block pattern enduro-style tyres (front, 80/100-21 51P and rear 120/80-18 62P) provide traction in a wide range of riding situations.
The 21-inch front wheel and 18-inch rear increase stability on rough terrain and allow the fitment of more off-road specific tyres if required. Application of a machined rear sprocket and M8 bolts (instead of M10) plus hollow rear axle saves 240g and 160g respectively.
|Battery Capacity (VAh)||12V-7AH|
|Dimensions (L×W×H) (mm)||2230 x 820 x 1200mm|
|Frame type||Steel Semi-Double Cradle|
|Fuel Tank Capacity (Litres)||7.8 L|
|Fuel Consumption||32.3 km/L|
|Ground Clearance (mm)||285mm|
|Kerb Weight (kg)||142kg|
|Seat Height (mm)||880mm|
|Bore × Stroke (mm)||76mm x 63mm|
|Carburation||PGM-FI electronic fuel injection|
|Engine Displacement (cc)||286cc|
|Engine Type||Liquid-cooled, Single, DOHC|
|Max. Power Output||20.1kW/8500rpm|
|C02 Emissions (g/km)||73 g/km|
|Oil Capacity (Litres)||1.8 L|
|Clutch||Wet multiplate, Assist Sliper Clutch|
|Brakes Front||256 mm x 3.5mm disc with two piston caliper|
|Brakes Rear||220 mm x 4.5mm disc with single piston caliper|
|Suspension Front||43mm Telescopic Upsidedown|
|Tyre Size Front||80/100-21M/C 51P|
|Tyre Size Rear||120/80-18M/C 62P|
|Wheels Front||Aluminium spoke|
|Wheels Rear||Aluminium spoke|
Online brochures coming soon. Try again at a later date or contact us.
Live Video Viewing
Feel at ease buying your next vehicle. Let our dealership come to you! Book an appointment to get a full interactive video with one of our team, we will show you the whole vehicle in full detail, and even give it a little drive for you if you like (safely of course).
Rest assured we will be transparent and friendly (we like talking to people). We can use WhatsApp, Facetime or Zoom and YES we deliver. To book a live video viewing please contact us.
Vehicle viewing from your home
Arrange a time to suit you
Ask our experts any questions
We have a dedicated delivery team, fully briefed, rehearsed and well experienced team of drivers. Completely contactless, safety comes first with strict distancing, sanitising, plastic wrapping and even a wipe of the keys before we pass them over.
We will deliver mainland UK. Costs vary depending if we are already doing a delivery near you, so make sure you contact us, you may be pleasantly surprised! Work or home deliveries available. Part exchanges taken.
Delivery 7 days a week
Delivery outside of working hours
COVID-19 Safety Measures
Experts in customer satisfaction, from a distance. We all have desires/needs for a vehicle, but we absolutely understand that it is not as easy as to just go and buy it - but not impossible.
Our drivers are trained in how to deliver your vehicle safely, from seat covers, to masks, to disinfecting the vehicle on your driveway. We deliver to every corner of the country, so please get in touch. Experts in customer satisfaction.
Social distancing measures in place
Give us a call: 01253 547519
Learn more about the North West Honda Super Centre
Undecided on a new Honda motorcycle?
Listed below is a selection of used Honda motorcycles we have in stock right now.
1000 Africa Twin ABS DCT
North West Honda Blackpool
Adventure Sports ABS Pearl White
North West Honda Blackpool